Saturday, August 9, 2025

Introducing Tiny Tabitha!

 Let me introduce you to Tiny Tabitha!  I've never been one to name my dress forms but I decided she needed an identity.  She's a half size form.  I found the pattern for her in an article on Scribd.  If you do not have a subscription to Scribd, the creator does have a downloadable pattern available on Etsy.  The pattern included 1/4, 1/3 and 1/2 scale versions.  I went with the half size scale.  Since I planned on using her with teaching demos, I chose to make her out of plain osnaburg linen.  I also decided to change the base a bit, choosing to use a wood plaque in lieu of the weighted cardboard base shown in the pattern.  She was a bit fiddly to sew but the process was interesting.  Here is the finished product:




I discovered that the pattern creator also had a pattern for arms on her Etsy site so I added them and painted the base:

Next up:  Under pinnings.  

I ordered the half sized shift and under petticoat pattern from B&T.  I modified the sleeves and a few other details on the shift as I wanted the shift to have sleeve buttons and an open cuff.

Note the laundry mark!


I didn't have any buttons small enough to use so I cut off the legs from some paper brads and curved them into button shanks.  The size was just right!

Here she is in her shift (Jordie for scale):

Next up--stays!  I wanted strapless fully boned stays.  There's a lovely line drawing on the JP Ryan stays pattern which my stays are made from so I used that line drawing and sized the width of the stays laying flat to the measurement I computed would fit Tiny Tabitha.  I then cut a fitting muslin from heavy interfacing, all in one piece with no seams.


I found this mock up to be fairly close though it was clearly too short.  I made the adjustments then cut it out of pink worsted and linen canvas, sewing the boning channels by hand.  I also added 1/8 inch tape to where the seamlines would be to give the illusion that the stays were made in sections.  Here they are before the boning channels are finished.


After boning them, the top was bound with white lambskin.  The tabs were split and the bottom portion of the stays were lined with the same lambskin, stitched right sides together with the fashion fabric which was much less tedious then attempting to bind the tabs.  A pink and white checked linen lining was added last.


Now to work on getting her dressed!

This has been an enjoyable project so far and she will come in handy for mantua making demonstrations.  The best thing is that I can make a garment for her using remnants from my own gowns!  I'll post her wardrobe as it develops.

1 comment:

  1. What a great project! Thank you to Jordie for standing in as a scale! Looking forward to seeing the full dress ensemble. Anna in SW Virginia

    ReplyDelete